What To Know
- If you’re looking to move, repair, or store your NordicTrack Treadmill C900, disassembling it is a crucial step.
- Use a screwdriver to remove the screws holding the deck in place.
- Remove the screws connecting the side rails to the front and rear base.
If you’re looking to move, repair, or store your NordicTrack Treadmill C900, disassembling it is a crucial step. While it may seem daunting, this guide will break down the process into easy-to-follow steps, ensuring a smooth and safe disassembly.
Tools and Materials
Before you begin, gather the following tools and materials:
- Allen wrenches (included with the treadmill)
- Screwdriver
- Ratchet wrench
- Pliers
- Tape or zip ties
- Moving blanket or towels
Step 1: Prepare the Treadmill
- Unplug the treadmill from the power source.
- Fold the treadmill up into the storage position.
- Remove the safety key and any accessories attached to the console.
Step 2: Remove the Console
- Locate the two screws at the bottom of the console.
- Use the screwdriver to remove the screws.
- Carefully lift the console up and off the treadmill.
Step 3: Disconnect the Console Wires
- Disconnect the power cord from the motor controller.
- Unplug the incline sensor and the speed sensor.
- Tape or zip tie any loose wires to prevent damage.
Step 4: Remove the Motor Cover
- Locate the two screws on the motor cover.
- Use the Allen wrench to remove the screws.
- Lift the motor cover off the treadmill.
Step 5: Disconnect the Motor Wires
- Disconnect the power cord from the motor.
- Unplug any other wires connected to the motor.
- Tape or zip tie the wires to prevent damage.
Step 6: Remove the Motor
- Locate the two bolts holding the motor in place.
- Use the ratchet wrench to remove the bolts.
- Carefully lift the motor out of the treadmill.
Step 7: Remove the Walking Belt and Deck
- Disconnect the belt from the motor pulley.
- Use a screwdriver to remove the screws holding the deck in place.
- Carefully lift the walking belt and deck out of the treadmill.
Step 8: Disassemble the Frame
- Remove the screws connecting the side rails to the front and rear base.
- Remove the screws connecting the front and rear base.
- Fold the frame up and secure it with tape or zip ties for easy storage.
Step 9: Protect the Parts
- Wrap the motor, console, and other parts in moving blankets or towels to protect them from scratches and damage.
Wrapping Up: A Dismantled NordicTrack C900
Congratulations! You have successfully disassembled your NordicTrack Treadmill C900. Follow these steps in reverse order to reassemble the treadmill when needed.
Frequently Discussed Topics
Q: What if I can’t find a specific screw or bolt?
A: Check the treadmill’s user manual or contact NordicTrack customer support for assistance.
Q: Can I disassemble the treadmill by myself?
A: Yes, but it is recommended to have a second person to assist with lifting heavier components.
Q: How long does it take to disassemble the treadmill?
A: The disassembly process typically takes around 2-3 hours, depending on your skill level.
Q: Can I store the treadmill disassembled for an extended period?
A: Yes, as long as the parts are properly protected and stored in a dry, climate-controlled environment.
Q: What should I do with the disassembled treadmill parts?
A: You can store them in a safe place, dispose of them responsibly, or sell them if you no longer need them.
